Detailed Product Description
Overview: The product provides customer with the most cost-effective solution for transmission of 2 channels uncompressed digital video, 1-4 channels uncompressed digital audio and 1-4 channels reversed RS232/RS422/RS485 data over one single fiber cable. It is an easy installation and adjustment free device while providing high quality, real-time video. Applications for this product include CCTV, video surveillance, homeland security, and ITS. The company also supplies the Order-Service and OEM for the market. Production features: Uncompressed video, 8-bit / 10-bit digital encoding/decoding Easy installation and adjustment free 8MHz video bandwidth, compatible with NTSC, PAL and SECAM Uncompressed audio, 24-bit digital encoding/decoding Module construction design (1-4 channels audio cards and 1-4 channels data cards can be installed) RS232, RS422/RS485 compatible data interfaces No electromagnetic interference, no radio frequency interference, no ground current Using APC circuit, invariable optical output power and increasing dynamic range LED status indicators for power, optical link, video signal and data traffic Gbit transmit and WDM technique, big capacity and easy to upgrade Transparent encoded mode, compatible with central CCTV camera manufacturer Support lossless relay Protection from lightning surge MTBF>100,000hrs Video specifications: Number of video channel: 2 channels Video connector: BNC Video bandwidth: 5Hz - 10MHz Video input/output impedance: 75Ω (unbalanced) Video input/output voltage: 1.0VP - P Differential gain (10%-90%APL): DG<1% (typical) Differential phase (10%-90%APLO): DP<1° (typical) SNR (weighted): S/N ≥65dB (the highest optical budget loss) Data specifications: Number of data channel: 1-4 channels simplex / duplex Data interface: RS-232, RS-422 (full duplex), RS-485 (2/4 lines), Manchester, Biphase Bit rate: 0-300Kbps Data connector: DB9 / crimp type terminal Data error rate: ≤10-9 Environmental specifications: Environmental temperature: -30 ~ +75°C Storage temperature: -35 ~ +85°C Relative humidity: 0-95% (non-condensing) Power specifications: Rated voltage: DC 5V Power: <5W (single end) Optical specifications: Optical connector: ST/FC Operating wavelength: 1,310nm (1,550nm) Optical fiber model: single-mode (multi-mode) Transmitting optical power: (-8 ~ 0)dBm on average Receiver sensitivity: <-22dBm for 1,310nm Optical power budget: >17dB Transmission distance: 45km Note: The transmission distance depends on the optical link loss budget, and would be influenced by the quality of the optical fiber, optical connector and the optical fuses. Consult factory for different transmission distance. Note: Optional optical connector based on the actual engineering demand. Applications: Intelligent transportation system (ITS) Security and protection system Telemedicine system Remote multimedia teaching / campus monitoring system Video conference system and audio conference system Long distance broadcast/television transmission system Building controlling system
View